Frequently Asked Questions about Remotes.
|
(CLICK TO ENLARGE) |
|
(CLICK TO ENLARGE) |
(CLICK TO ENLARGE) |
Versa and Elite Remote, turn the remote upside down and take the four screws out of each corner. Gently remove the bottom half and turn upright. Carefully cut the zip ties holding the battery and remove. Insert the new battery, replace bottom half, tighten the screws, charge battery.
Guider Remote, remove the back two screws and replace the batteries.
CHANGING THE BATTERY MAY REQUIRE REMOTE REPROGRAMMING.
Versa and Elite Remote, does take a special battery that has a smart charge function when used in combination with the EZ Hauler's supplied AC & DC chargers, which you can purchase from us. Use the parts order form on the Support Page and enter this information. Be sure to include the transmitter or machine serial numbers to make certain you get the correct replacement.
Guilder Remote, simply take 4 AA alkaline batteries. Though you can order them through SDP Manufacturing, any AA alkaline batteries will work.
For the Versa and Elite Remotes the serial number is a silver tag that is located on the front lower half of the remote.
For the Guider Remote the serial number is on a silver tag that is located on the bottom of the remote.
Versa and Elite Remote
1.Attach the 25' umbilical cord to the appropriate connection on the machine, make sure that the remote is in the correct position, example: If connecting to the crane make sure the toggle switch on the remote is in the crane position.
2.With the cord connected, turn your remote on, turn your machine on. The green light will turn solid for a few seconds and then start flashing rapidly.
3.Unhook the cord from your remote and test.
Guider Remote
Our machines have a wide verity of functions that may or may not be available to your machine. To help keep cost down, we have combined all of the functions on one or two remotes. If your machine is not equipped if a specific function then the corresponding function on the remote will not work. Your replacement remote should work all your machines functions, after it has been programmed to your machine. Extra options can be purchased as kits and installed as an after-market upgrade. Be sure to include the machine serial number when ordering upgrades and options.
You will need to contact us using the contact page for servicing the remote system. We will supply an RMA (Return Merchandise Authorization) number which you can get from Parts and Technical Support. Once the product is received, we will send it to the appropriate service center. Please use email to contact us, to help keep track of your product. General turn around time on remote service is approximately 2-4 weeks (not including transit time).
Connecting the 25' cord is like turning the wireless function off, and makes it a hard wired controller. It can also be used to charge your remote.
